data signaling rate मीनिंग इन हिंदी

उदाहरण वाक्य

1. The data transfer is interrupted at intervals in order to produce the required average data signaling rate.
2. Burst transmission, however, enables communications between data terminal equipment ( DTEs ) and a data network operating at dissimilar data signaling rates.
3. Internet service providers ( ISPs ) offer Internet access through various technologies that offer a wide range of data signaling rates ( speeds ).
4. The " maximum user signaling rate ", synonymous to gross bitrate or data signaling rate, is the maximum rate, in bits per second, at which transmission and no overhead information.
5. For a given data signaling rate, i . e ., bit rate, the NRZ code requires only half the baseband bandwidth required by the Manchester code ( the passband bandwidth is the same ).
6. Burst transmission in isochronous form enables communication between data terminal equipment ( DTE ) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.
7. Burst transmission in isochronous form enables communication between data terminal equipment ( DTE ) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.
8. The USB 3.1 standard increases the maximum data signaling rate to 10 Gbit / s ( 1280 MB / s ), double that of SuperSpeed USB, and reduces line encoding overhead to just 3 % by changing the encoding scheme to 128b / 132b.
9. The data signaling rate actually observed on real networks is less than the theoretical maximum, due to the necessary header and trailer ( addressing and error-detection bits ) on every frame, the occasional " lost frame " due to noise, and time waiting after each sent frame for other devices on the network to finish transmitting.